EPSON Stylus Pro 3800 - 3800C - 3850 - 3880 - 3885 - 3890 - SureColor SC-P800 - Epson Surelab D700 Waste Ink Box Resetter

£25.95

How to use the resetter: The pins on the resetter should make good contact the terminals on the chip of the tank, be sure to press against the pins firmly. When the chip makes proper contact with the pins on the resetter, the LED light in the resetter will light up (starts out RED, and after 2-3 seconds will blink and then turn GREEN). GREEN means a successful reset. If the LED stays red, it means that the chip on the cartridge is abnormal and not resettable. Once the tank has been reset, thewaste ink that it has collected has to be removed before installing it back into the printer.

This can be done in a number of ways. One is to dispose of the pad and refill the box with new absorbent material, e.g. nappies or incontinence pad can be cut to size and packed in.

PLEASE NOTE it may be necessary to rotate two tanks. Having a spare ready to go is a good plan anyway.

PLEASE NOTE The body colour may vary. The images are just examples of the types of bodies used to fit the electronics inside.

T5820 chip resetter for Epson maintenance tanks.

used in:-

Epson Surelab D700

Epson Stylus Pro 3800

Epson Stylus Pro 3800C

Epson Stylus Pro 3850

Epson Stylus Pro 3880

Epson Stylus Pro 3885

Epson Stylus Pro 3890

SureColor SC-P800

Fuji FujiFil DX100